AK PHOTOETCH BENDING TOOL Photoetch bending tool. Made of high quality steel. Separate the piece from the photoetched sheet. Place the piece inside the tool by loosening the screw and fix it by tightening the screw again without forcing it. Bend the piece using the blade included in the box until you achieve the desired shape. Features: - Surface 59 mm.
- Blade for bending photoetch included.
- Different types of wedges for bending pieces at an angle.
USE OF THE TOOL: 1. Trim and clean the photoetched piece. 2. Loosen the bolt so that the spring slightly lifts the top plate of the tool. 3. Hold the workpiece firmly. Bend the workpiece with your own hands or with the help of the blade. |
