AK PHOTOETCH BENDING TOOL 2 Photoetch bending tool. Made of high quality steel. Separate the piece from the photoetch sheet. Place the piece inside the tool by loosening the screws and secure it by tightening the screws again without forcing it. Bend the piece using the blade included in the box until you achieve the desired shape. Features: - Surface 140 mm. 128 mm blade for bending photoetched parts included.
- 16 wedge options for bending curved parts in V, L, Z, P and U.
- Allows bending parts at an angle of up 135º.
- Long straight edge for shaping fenders and shields.
USE OF THE TOOL: 1. Trim and clean the photoetched piece. 2. Loosen the bolt so that the spring slightly lifts the top plate of the tool. 3. Hold the workpiece firmly. Bend the workpiece with your own hands or with the help of the blade. |
